Johnny5C Posted September 1, 2021 Share Posted September 1, 2021 Hi all, I have a connects2 unit arriving this week to plug into my symphony 2+. I think it will be a simple install, except it comes with a wired mic which I will have to run up through the dash, up the A pillar and mount overhead somewhere. I have searched online for a day now and not found any guidance. Mine is a convertible. I suppose I cold just go out and start stripping the overhead parts, but any advice would be appreciated. Cheers Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted September 1, 2021 Share Posted September 1, 2021 As a new owner I'm no expert but have a look at the trim for sale on eBay and look at the clips. Getting the cable to the A pillar will be straightforward and from the photos, it looks like there may be 2 bolts/screws at the top. Otherwise the A pillar trim is held in by push clips. Do yourself a favour and buy a set of trim tools, you are much less likely to damage the trim and it's way easier than trying to use a screwdriver. something like this is perfect https://www.amazon.co.uk/UTOOL-Removal-Including-Fasterner-Drawstring/dp/B08M5YHJFJ/ref=sr_1_1_sspa?crid=1UDKQ37KBUZVJ&dchild=1&keywords=car+trim+removal+kit&qid=1630525254&sprefix=car+trim%2Caps%2C157&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzVEpNWUdKSFBMWUxUJmVuY3J5cHRlZElkPUEwMTMzMDgwMzdJVEdNUkZHRE1RUiZlbmNyeXB0ZWRBZElkPUEwNzYyMTg4MUpYQVFHRllSMEFVOSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= Quote Link to comment Share on other sites More sharing options...
Johnny5C Posted September 1, 2021 Author Share Posted September 1, 2021 Thanks Tommy, that's really good advice, and those images really help with identifying the clip points on the a pillar. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.