kassi Posted June 22, 2023 Share Posted June 22, 2023 Hello everyone. I got into some trouble after buying a used 50000 km Audi A3 8v. Just after a week i got this EPC and Engine check light when i was driving. EPC light goes off every night and when i go to work again next morning it shows up again. ON IDLE: Turbocharger actuator voltage : 3.68 -3.71V Turbocharger wastegate position: 0 -3% Turbocharger was changed recently by the previous owner. I dont know if they changed the actuator or not but it looks good in condition no rust. I recorded couple of Actuator parameters with OBD II Scanner. Driving on highway i let the throttle go (no throttle) around 90km/h suddenly the EPC and Engine Check Light came on(attaching video with it). And the actuator signal voltage went to 4.99v which actually stays at around 3.7v without epc and engine light. After EPC light (seems like actuator position sensor failure) the actuator stays at 0% and i get Poor acceleration. Help would be really appreciated. Screen_Recording_20230621_232903_1.mp4 Quote Link to comment Share on other sites More sharing options...
Steve Q Posted June 23, 2023 Share Posted June 23, 2023 If it's been bought from a dealer within 30 days then it's their responsibility to put it right foc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.