niedzial1983

Dealer wont do it. No idea about the value . You need to find someone with vag com or a local garage who will be willing to do this mod .plus they will be able to check your car for any fault codes . Max 30-40£

Answer from the web The factory preset temperature is set to 28 degrees C, if you want to increase (or decrease it) using vcds simply go to module 16 (steering wheel), adaptation and select channel 10. the preset value is 28 which relates to 28 degrees. Change this to a temperature of your choice and you are done

Mmi recognizes folders up to 64 songs in one as far as i remember . You can sort your music in the sd card

Vcds scan would be my first point. It may show where the issues is .

To test cv joints go on an empty carpark and turn wheels all the way one side and start accelerating rapidly , no clicking sound then they are fine , same for the other side. Did you had the same issue before chaning disks/pads ?

Interior led will work just fine , same as puddle lights Interior comfort module its not as sensitive and will not show dash errors, only on vcds scan sometimes Look at this on eBay http://www.ebay.co.uk/itm/172233982181 Reg led should work as well Its the central electrics module that controls exterior lights that causes led to hyperflash and dash errors

Have you done a vcds scan to see for any faults ?

Cool. Here is an example of chain rattle . Usualy its the top tensioners that fail . Asb have been improved by audi and chain issues are less likely to happen but...

Led would be universal , the fitting is bespoke to fit sline bumper. No idea about wires . Let us know how you get on

Send us a video . It could be a cam chain rattle on start There were 3 versions of 3.0tdi in a6 c6 Bmk - chain issues ASB - chain issues fixed CDYA - facelifted model What year is your a6 ?

Your best option would be something like this with will save you cutting the original drl plugs

Right ... firstly audi a6 c6 does not like led...ive been resarching this subject for 3 years... if you dont have good resistors/canelers it will show errors on the dash and hyperflash even when the car is off as the system is checking reguraly for faulty bulbs . Have you got halogen or xenon headlights ? Idealy you want to connect them to the original drl in the headlights so it operates correctly. You could also wire them in to the fog lights and using vcss code fog as drl ( but you will lose fogs) Last option is to wire them to the sidelights But biggest pain is the error and hyperflash

Presonaly having 2 seperate dashcams and trying to view footage from both would drive me nuts ! . A dual dashcam is the way

Here how to dissasemble a mirrior. Its from tt but it will be the same in your Check with audi for the part price or https://www.ebay.co.uk/p/Audi-A3-LED-Wing-Mirror-Indicator-Repeater-Right-Driver-off-Side-O-s/1051619367

That trim is chromed plastic :( i have spend hours trying to clean up mine (a6 window surrounds) but after a wash or rain it came back . Wrap is only option

Ask the garage . Either they used long life oil ... or they coded wrong info when reseting service light

What audi have you got ? Year ? Engine ?

Let us know :)

Front 42psi rear 36psi :)

What tyres have you have ? Spec is written on the sidewall of each tyre

Have the car dignosed wirh vcds and see if any fault codes can lead you to the problem

Im sure money can buy anything , even extra colour stitching :)

Dont worry about other codes. They can be triggered by egr

What other problem ?