Steve Q Posted September 11, 2021 Share Posted September 11, 2021 Loving the interior 😍 1 Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted September 11, 2021 Author Share Posted September 11, 2021 33 minutes ago, Steve Q said: Loving the interior 😍 When I was a kid, all the best cars had red interiors. We still have a 1.9 205GTI with a half red interior. My first car was a VW Scirocco and I replaced the interior with red and black Quote Link to comment Share on other sites More sharing options...
Steve Q Posted September 12, 2021 Share Posted September 12, 2021 12 hours ago, tommyboy40 said: When I was a kid, all the best cars had red interiors. We still have a 1.9 205GTI with a half red interior. My first car was a VW Scirocco and I replaced the interior with red and black Cars had more colour in general back in the 70s. Compared to all this dreary silver, grey, black, white etc. I appreciate my Audi is grey lol but non the less I'd like to see more colour on the road 🙂 Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted September 27, 2021 Author Share Posted September 27, 2021 Back from holidays and the car finally has a clutch! Straight back to work so all I did was to replace the last bits of trim. So we have a before And an After I'm pretty happy with the result. Next job has to be puddle and footwell lights. I'm always amazed at the options people choose, I've got electric lumbar support, the cool box and iPod adaptor in the glove box but no footwell or puddle lights! Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted September 28, 2021 Author Share Posted September 28, 2021 Quick shot of the beading on the convertible top after it's treatment Quote Link to comment Share on other sites More sharing options...
Steve Q Posted October 4, 2021 Share Posted October 4, 2021 On 9/28/2021 at 12:18 PM, tommyboy40 said: Quick shot of the beading on the convertible top after it's treatment Wow! Looks great! 👍 Quote Link to comment Share on other sites More sharing options...
S-Line Posted October 5, 2021 Share Posted October 5, 2021 Fantastic job Thomas! All your hard work will make it worthwhile. Good to see a B7 Cab being kept on the road. They are such a pleasure to drive and look fantastic when cleaned. Good job on the roof BTW, I'm lazy and have a pro do mine every 12 months or so. Something you need to keep on top of. Keep up the good work and post some pics when completed. 👍 Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 5, 2021 Author Share Posted October 5, 2021 Cheers Paul & Steve, I’ve been enjoying it (and the tiny running cost) all week. It was a quiet day today so I had time to give it a decent clean. Wash and dry followed by clay bar. I’m always amazed at how much gunk it removes. You can see that it’s got some deep scratches. I’m not intending to get rid of them before the winter, I’m really doing a winter prep. You can see the bonded tar on the lower trim. Tardis does the job. The clay shows the result Next up was a polish. I wasn’t going for a full correction, simply a polish before applying Gtechniq Exo. This is a shot before the Exo but after the polish with the rotary. Quote Link to comment Share on other sites More sharing options...
Steve Q Posted October 6, 2021 Share Posted October 6, 2021 Looking great 🙂 Quote Link to comment Share on other sites More sharing options...
S-Line Posted October 6, 2021 Share Posted October 6, 2021 12 hours ago, tommyboy40 said: Cheers Paul & Steve, I’ve been enjoying it (and the tiny running cost) all week. It was a quiet day today so I had time to give it a decent clean. Wash and dry followed by clay bar. I’m always amazed at how much gunk it removes. You can see that it’s got some deep scratches. I’m not intending to get rid of them before the winter, I’m really doing a winter prep. You can see the bonded tar on the lower trim. Tardis does the job. The clay shows the result Next up was a polish. I wasn’t going for a full correction, simply a polish before applying Gtechniq Exo. This is a shot before the Exo but after the polish with the rotary. Looks great. Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 6, 2021 Author Share Posted October 6, 2021 Thanks chaps. Quick beading shot after Exo Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 15, 2021 Author Share Posted October 15, 2021 So I've had my first breakdown, well sort of! Went to the shop and halfway through the journey, I had a loss of power and some vibration. Got it home and said Bugger. I borrowed a scan tool from a mate and discovered a misfire on cylinder 2. Quick hop to the dealer and picked up a set of plugs and a coil pack. Interestingly, the coil pack would have been €100 from a motor factors but was only €53 from the dealer. Quote Link to comment Share on other sites More sharing options...
S-Line Posted October 15, 2021 Share Posted October 15, 2021 3 hours ago, tommyboy40 said: So I've had my first breakdown, well sort of! Went to the shop and halfway through the journey, I had a loss of power and some vibration. Got it home and said Bugger. I borrowed a scan tool from a mate and discovered a misfire on cylinder 2. Quick hop to the dealer and picked up a set of plugs and a coil pack. Interestingly, the coil pack would have been €100 from a motor factors but was only €53 from the dealer. Glad it’s all sorted and hopefully no more problems Tommy. Mine’s in next week to replace the front two engine mounts that are leaking badly. My mate who has his own garage is doing the job as Audi had quoted £786! The parts are only £300. That’s nearly £500 in labour. That’s an Audi dealer for you. Rather give an old pal the money, and much less of it too! Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 15, 2021 Author Share Posted October 15, 2021 1 minute ago, S-Line said: Glad it’s all sorted and hopefully no more problems Tommy. Mine’s in next week to replace the front two engine mounts that are leaking badly. My mate who has his own garage is doing the job as Audi had quoted £786! The parts are only £300. That’s nearly £500 in labour. That’s an Audi dealer for you. Rather give an old pal the money, and much less of it too! I’m no mechanic but I’m handy with a spanner. I would do most bits myself as I quite enjoy it and it’s vastly satisfying Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 17, 2021 Author Share Posted October 17, 2021 Gave it a quick wash and a wipe over. It is a nice looking car Quote Link to comment Share on other sites More sharing options...
S-Line Posted October 17, 2021 Share Posted October 17, 2021 9 minutes ago, tommyboy40 said: Gave it a quick wash and a wipe over. It is a nice looking car looking good. Love that interior. And that engine bay, wow! Steam cleaned yourself or professional? Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 17, 2021 Author Share Posted October 17, 2021 10 minutes ago, S-Line said: looking good. Love that interior. And that engine bay, wow! Steam cleaned yourself or professional? Cleaned myself. I use G101 and stiff brush to clean most of the dirt and then wipe with a microfibre. It's not finished yet but it's coming along. I may eventually install a steering wheel with controls and I've read that B7's are prewired for it. Can anyone confirm this? I did order a set of puddle lights for it. I'll post some pics of the install when I get them. Quote Link to comment Share on other sites More sharing options...
S-Line Posted October 17, 2021 Share Posted October 17, 2021 2 hours ago, tommyboy40 said: Cleaned myself. I use G101 and stiff brush to clean most of the dirt and then wipe with a microfibre. It's not finished yet but it's coming along. I may eventually install a steering wheel with controls and I've read that B7's are prewired for it. Can anyone confirm this? I did order a set of puddle lights for it. I'll post some pics of the install when I get them. Dunno about steering wheel. But I wanted to install puddle lights too but was told there was no wiring or pre-cut holes for the lights as it wasn’t an option when my car was made/purchased. Quote Link to comment Share on other sites More sharing options...
Steve Q Posted October 22, 2021 Share Posted October 22, 2021 It's really coming together 🙂 Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 23, 2021 Author Share Posted October 23, 2021 On 10/22/2021 at 7:08 PM, Steve Q said: It's really coming together 🙂 Cheers Steve. It’s a question of deciding what to do and what to leave alone Quote Link to comment Share on other sites More sharing options...
Steve Q Posted October 28, 2021 Share Posted October 28, 2021 On 10/23/2021 at 8:32 PM, tommyboy40 said: Cheers Steve. It’s a question of deciding what to do and what to leave alone Once you start it's hard to stop! Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted October 28, 2021 Author Share Posted October 28, 2021 4 minutes ago, Steve Q said: Once you start it's hard to stop! Story of my life Steve! Quote Link to comment Share on other sites More sharing options...
tommyboy40 Posted July 7, 2022 Author Share Posted July 7, 2022 Seems like ages since I've been here. I'm looking for some pictures of the lower front bumper on other peoples cars. I'm obviously missing some trim which I'd like to find. See below pics of driver and passenger side. Could;d anyone show me a pic of theirs please? Quote Link to comment Share on other sites More sharing options...
S-Line Posted July 8, 2022 Share Posted July 8, 2022 14 hours ago, tommyboy40 said: Seems like ages since I've been here. I'm looking for some pictures of the lower front bumper on other peoples cars. I'm obviously missing some trim which I'd like to find. See below pics of driver and passenger side. Could;d anyone show me a pic of theirs please? Yes Tommy. You appear to be missing little flat black panels that hide whatever is behind the vents. Quote Link to comment Share on other sites More sharing options...
gsmdo Posted July 8, 2022 Share Posted July 8, 2022 Epic job on the bodywork 😃👍 I always think silver is one of the most difficult colours to make look shiny - you've certainly managed that! Quick question - did you throw out the old faux-aluminium trim? If not, what sort of condition was the driver's door trim in (mine's a bit scratched)? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.