Skip to content
View in the app

A better way to browse. Learn more.

Audi Owners Club (UK)

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.


Welcome to the Audi Owners' Club - An Independent community!

Membership is completely free, and our community is built by enthusiasts, for enthusiasts. We’re a proudly independentnon-official club, so all the help and opinions you’ll find here come directly from members with real experience of Audi ownership.

Join the club now!

 

No Crank No Start after battery change

Featured Replies

Hello,

I have a 2009 3.2L A5 Quattro S-line 

I am currently stuck with a fault I cannot find any information on at all. I change my battery as the last one finally died and now I have an EPC and Engine Light, as well as none other than one strange fault code in the AUTO HVAC module:

1 Fault Found
01206 - Signal for Duration of Ignition Off Time 
008 - Implausible Signal
Freeze Frame 
Fault Status 01101000
Fault Priority 7
Fault Frequency 1
Reset Counter 170
Millage 102156 km
Time Indication 0
Date 2009.06.26
Time 00.32.45

Back story

My car battery was on its way out, it was an original Audi battery and I could tell it was going because it started to read voltages bellow 12v, and the car was taking longer and longer to start. Yesterday, I started my car once, drove up the road, turn it off for 30 min and then it wouldn’t start but just crank slower and slower each time I tried until eventually it was just clicking. Then curtain electronics started shutting off one by one. We tried to bump start the car down a hill as we didn’t have jump leads but this didn’t work.

So I bought a new battery, put it all in, put key in, Coded it on VCDS by changing 1 value on the serial code, thats when I got the EPC light, the engine warning light and this time there was no cracking no starting. That’s when I did the scan and that’s the only fault code that keeps coming up.

I tried clearly the codes a couple of times but this didn’t help, I tried a different battery also with no luck. Voltage hasn’t dropped as I’ve been getting 12.3V constantly. All electrics now work fine, When I go to try and start, my dials do the usual sweep and I here an repeated whooshing sound from the rear middle of the car for a couple of seconds and 1 click, from somewhere under the dashboard in the drivers side… and then nothing.

Someone said the whooshing sound is probably the pump priming? And that I could have shorted something when I connected up the car? Someone else said it sounds like my instrument cluster is electronically stoping the signal to my starter?

I am really not sure what it may be, perhaps a sensor of some kind? I have visually checked all the fuses in all 4 fuses boxes of my car and they look fine, I am not sure where the starter relays are though and don’t have diagrams to tell me which one it is so Idk how to check those. 

I am really stumped and I can’t find anyone with the same issue as me, I have search many forums but still can’t find anything, but I thought I’d post here just incase there are people who may know what’s happening. 

Thanks.

Guest
This topic is now closed to further replies.




Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.