Skip to content
View in the app

A better way to browse. Learn more.

Audi Owners Club (UK)

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.


Welcome to the Audi Owners' Club - An Independent community!

Membership is completely free, and our community is built by enthusiasts, for enthusiasts. We’re a proudly independentnon-official club, so all the help and opinions you’ll find here come directly from members with real experience of Audi ownership.

Join the club now!

 

Key resync after battery replacement not working....

Featured Replies

Hi All,

I have a 2012 A3 2.0 tdi, and the battery in one fob was dead. So, I have replaced it with a new CR2032 battery, and clipped it all back together.

The little red light on the fob flashes once now when you press a button.

Reading in the manual, it says to resync it you need to press the unlock button, then manually unlock the car, then hit either the close or open button.

I have done this numerous times now and no joy.

Is there anything else to try before I need to think about getting a kar key person to look at it?

Cheers

Safara

  • Author

Cheers Shytot - will give these a go!!

Tomorow, when it is light again. And not blowing a blooming gale!!

  • Author
16 hours ago, Shytot said:

I posted this link on another thread - https://www.youtube.com/shorts/osWj4f-Mn7g - might be worth a try?

also this one is slightly different to your method https://youtu.be/QkIdVobV_UI?si=z0dO4wwsFD8_HBsQ - again worth a try.

Hiya Shyshot,

No joy unfortunatly - tried both of these and nothing doing 😞

2 hours ago, Safara said:

Hiya Shyshot,

No joy unfortunatly - tried both of these and nothing doing 😞

That's a shame - it sounds like you need to get the door "connected" back to the ecu / entry system. The mechanical bits need the electronics! 

  • Author

I have read of another method that is to put the working key in the ignition, turn it on. Then get out, close the drivers door and lock it with the key to resync. Then take it out and press the unlock button a few times.

Will try this and see what happens...

Hello Grant,

Sorry for the potentially pessimistic response, but I literally tried all the suggested methods I could find pre-Covid, in an attempt to recode the ‘spare’ remote for the humble A3 - failed - but fortunately the key still opens and starts the car, so given up on any ‘non- electronic’ re syncing! 
Kind regards,

Gareth. 

  • Author

Cheers Magnet - hmmm, thats a shame - it must have worked at some point I suppose....

So, if I just try everything I can find - and if none of that works, then ity is off to a ato key person to recode something....

  • Author
32 minutes ago, cliffcoggin said:

Grant.

You said you changed the battery in "one" fob, implying that you have a second fob which works. Is that true?

Yepper 🙂
One fob is working fine.
Changed the battery in the spare fob. It works physically unlocking the door, and starting the car. Just the remotre buttons on it not working.

17 hours ago, Safara said:

Yepper 🙂
One fob is working fine.
Changed the battery in the spare fob. It works physically unlocking the door, and starting the car. Just the remotre buttons on it not working.

That confirms it is the fob that is at fault, not the receiver in the car nor the electric mechanism in the door. It doesn't get you any closer to a solution but at least you know the door card does not need to be removed or the wiring examined as is often the case with faulty lock mechanisms.

  • Author

Anyone else have any sequences to try before I go down the call a auto lock person?

  • 1 month later...
  • Author
12 hours ago, a6blacked007 said:

Did you get this sorted

 

I did thanks - and not quite sure how I did it. I think it was the following....

I opened the car with the working key. I put the broken key in the ignition, pressed the unlock button and turned the key on. Then took the key out and pressed the lock button and the car locked.

All is fine now.

 

Create an account or sign in to comment





Background Picker
Customize Layout

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.