Tow Bar coding 2019 Avant

[Jim Ridley]

Hi to you all 

would any of you guys have a link to or a sequence for Coding a Tow Bar to  2019 Avant using VCDS 

Thanks in advance 

 

Jim 

[Jim Ridley]

almost got it sorted  just cannot access 13 Auto Dist Reg in VCDS the controller is not responding  

 

followed these instructions all of it worked but cannot access STG 13 

Coding applies to Audi A6 C8 

STG 19 > Installation List > "69 - Trailer/Anhänger" - Activate
STG 01 > Coding > Byte 5 > Bit 4 "Trailer installed" - Activate
STG 09 > Coding > Byte 13 > Bit 4 "Hitch ECU,installed" Activate
STG 13 > Coding > Byte 3 > Bit 3 Activate
STG 17 > Coding > Byte 14 > Bit 5 "Trailer, YES" Activate
STG 46 > Coding > Byte 14 > Bit 6 "Trailer control unit, 0=not installed / 1=installed" Activate
STG 6D > Coding > Byte 01 > Bit 7 "Trailer Recognition installed" - Activate
STG A5 > Coding > Byte 14 > Bit 1 "FW_AAG,installed" Activate

 

[Steve Q]

Glad you're nearly sorted. Sorry the last bit isn't working. 

[Jim Ridley]

Thank you mate ,after a bit more digging and a bit of a disagreement with a guy on VCDS it appears I dont have this module in the car so this I why I could not access it ,

STG 13 > Coding > Byte 3 > Bit 3 Activate refers too (auto distance regulation) =adaptive cruise control ,as I dont have this on the car I dont need this section so all sorted 

 

Cheers

 

Jim 

[Steve Q]

Fantastic news 😊