Afternoon everyone.

 

I had a search around and couldn't see this question answered.

The High Beam Assist function has never worked.

Reading on another forum it may be related to a level sensor.  I did a VCDS check but can't determine which sensor is at fault (if that is the issue)

The readout is attached and I'd appreciate any guidance offered.

 

 

Auto Dip Fault.txt

Is it worth changing both if there not too expensive. Alternatively it might need a more advanced diagnosis with an auto electrician or Audi independent specialist. 

On 10/13/2025 at 1:18 PM, a2z said:

Afternoon everyone.

 

I had a search around and couldn't see this question answered.

The High Beam Assist function has never worked.

Reading on another forum it may be related to a level sensor.  I did a VCDS check but can't determine which sensor is at fault (if that is the issue)

The readout is attached and I'd appreciate any guidance offered.

 

 

Auto Dip Fault.txt 759 B · 2 downloads

Hi I had the same problem on my car, it didn't ever work because it was never fitted as an option when built and the clue is if there is the camera fitted above the driver mirror.

Steve.