Jump to content


Recommended Posts

Posted

Hi im new to the group, wondering if anyone can help. 
 

I had an issue with my car, engine was only reaching around 70 degree temp. So had the main thermostat replaced. Now the car does reach 90 and stays there well, but it takes a long time to get there. Maybe 30mins of driving. Obviously isnt normal still. Ive been told to change the 2nd thermostat by some other owners, but when i give my engine code to suppliers, they are telling me i dont have that part in my engine. Anyone resolved the slow warm up issue? Engine CJCD. 2.0 Diesel CVT

thanks alot, look forword to any replies

IMG_4781.jpeg


Posted

First question first before moving on:-

Brand of new thermostat used? 

Posted

Hi Magnet. I’ll contact garage and find out which one they put in. Am i right in thinking that if it reaches 90 then its working correctly though? 

Posted

Yep 90 degrees is where it should be. Have you had a diagnostic check to see if any fault codes flag up? 

Posted

No i am checking fault codes tonight, as the ob2 scanner was too wide and did not fit, so waiting for extension cable.

So i dont know what thermostat was fitted, but i think it is faulty. 
so i started my car and let it idle for 10mins, after 10mins the temp gauge showed 50 still, but the top hose on radiator was quite hot. Am i right in thinking the thermostat is stuck open?

Posted

A long warm up time suggests it not fully closing. I have read a few cases in these forums where even new thermostats were defective. I guess that is why Magnet is asking about the brand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now





×
×
  • Create New...

Forums


News


Membership


  • Insurance
  • Support