Latest Posts

Thank you for your reply. I have the invoice for brake pads ( dated 18//07/23) and they are Borg and Beck BBP1766 from Motor Parts Direct - I have checked their web site and they are correct. I note new discs were also fitted at the same time supplied by them BBD4509, which are correct. With regard to carrier wear the car has done 12500miles, and don't believe the car has been driven hard, since I know the previous owner, who has owned the car from new. Thank you for the very helpful diagrams and note the only spring on the caliper shown is on the outer which I have replaced. I find this unusual as other calipers I have worked on have springs in the base of the carrier and hold the pads tight in the holder. I have ordered some ceramic brake grease and will carry your recommendations and will let you know. Thank you again.

Audi A4 B8 2013. MMI let's me connect my phone for calls but not for audio. I had an issue a while ago where the MMI wouldn't work at all, but got that sorted, turned out to be a fuse. Everything was then working fine, it's just suddenly stopped playing the audio through my phone. Any ideas please? Thank you

The problem is vibration between one and 2000 revs after that, the car drives fine

Picking up my S5 Avant today. Lets hope a few months of customer "beta" testing has ironed out the glitches. I have been advised that there are a few features that are pending updates. Thankfully SW updates are over the air - or are they?? I have worked in an electronics and software environment and all new products will have glitches, bugs, undocumented features and ultimately recalls where over the air fixes are not possible. The price to pay for initial exclusivity? Agree with the comment about the S5 being more like an A6 regarding dims and possibly appearance. From my perspective this is a plus as I am trading in my trusty A6 C7 for it. The load space is less but the towing capacity is up, BONUS! The car is on 20" rims, not sure 19's are an option - I did not configure my car but did not see other wheel options on the Audi configurator site. The car has more toys than Santa's workshop - its going to be some time before I find and test them all but looking forward to it.

I wish to refurbish or purchase new centre wheel caps. Cannot find reasonably priced ones. Any suggestions would be helpful.

I had the MAF sensor changed and a fault lit up again, did a little research and found that there is a pressure sensor for the DPF. Located tot he rear right of the engine - top. I recall mine was about £28 from Euro Car Parts and a 10 minute fit.

Yes. I have gone through a whole lot of forums and post that have not ever resolved the problem. But im hopeful someone happens to find this and have a new fix. Also i have figured that ill have to check if the wires from the boot are broken in multiple places possibly because first we found some of them had been cut due to the constant wear. But they could be broken from multiple places. Since if i measured right the vacuum electric wires are getting power when they should not but the vaccuum pump still is not running. And if worst comes to worst im going to try and bypass the alarm and immo.

Thanks Magnet I have downloaded a service repair manual of Esty I think it was but prefere a proper book online manuals I seem to be allways scrolling about and hunting that is what it is .

Hi folks, the mechatronic unit in my a6 is needing replaced and I’m looking for any suggestions or recommendations on garages that would be able to do this? I know about re manufacturing but don’t know how to go about it. Any help would be brilliant. Thanks

Me too, but all's well that ends well.

Getting blood from a stone is easier.

Oh I see now. Nope it seems to operate as normal, starts easily every time.

Yeah will update you as I progress, I'm sure ti be popping up for a while I was always on Audifans back when mine was on the road and I've a fair bit of work to do thanks.

MOT until 02/26. I bought it from Yeovil Audi in 2013 with only one previous owner. All Audi main dealer history to 2022 then Fergies in Thatcham in 2023 and a local garage last week. It has done 120k. I'm looking for £5,590. The car is located in Reading, Berkshire. Features: AC & Climate Automatic headlights & wipers CD/Radio/Bluetooth/SatNav Cruise Control Front Heated seats Electric Heated Mirrors Leather Seats Parking Sensors 4x Electric Windows Xenon Headlights Note: there is minor cosmetic damage to the rear bumper and near-side rear wing. I can supply photos if required. I have plenty more photos if you are interested.

Have you progressed this matter during the month Andy?

Any update for us Tom?

Are you going to return to the form Sam, to update on the questions posed?

Ayoop folks, we took her out for a run (breakdown services unknowingly on standby!) and put her through her paces on comfort setting, so roundabouts, fast exits from junctions etc and all seems good......I kinda wonder what's going to sulk next, but I'll cross that bridge when I get to it. In the meantime, the fuel gauge isn't working and I sometimes can get it to work by folding down the offside rear passenger seat, or placing something heavy on the seat cushion. I wonder if this means a wiring fault as opposed to a failed(ing) sender unit. As I rarely use the performance, 600 miles between refills is what I go with, but the range data would be nice to have again.....thanks again everyone.

Hi guys can anyone suggest a part no. checking site I'm trying to confirm parts for a front brake upgrade on my b3 16vq I've got the twin pot calipers but have been told I also need the hubs from a 90q so got hold of 2 part no DE 895258 & 7 k just want to make sure they're correct before they're refurbed thanks

Wowsers that's a big saving. Thanks for the write up Dave I'll pin your post so it'll be easier for other q7 owners to find

Think it takes a reading from the gearbox

Where have you tried so far? You could try eBay, or the old fashioned way and Google local breakers yards that might have a VAG group vehicle with the same engine.

It's only condensation and nothing to worry about. Water vapour is formed during combustion which then condenses in contact with cold steel. It will be worse in cold weather and will disappear when the exhaust system is hot.

SET OF 4, AUDI A6 S-LINE 18" INCH ALLOY WHEELS & GOOD TYRES. MANUFACTURE PART CODE: 4K0601025D CAME OFF A AN AUDI A6 C8, MAYBE THE ALLROAD QUATTRO ALSO. CODES OFF THE BACK OF THE WHEELS: - E 8Jx18H2. - ET39 - 4K0601025D - DOT - 008868/2013 - AlSi7M - AUSTRIA - AA3 - AU191 K4 WHEELS ARE IN PRETTY NICE CONDITION. ONE WHEEL HAS A MINOR GRAZE ON THE EDGE OF THE SPOKE AND EDGE OF RIM, WHICH HAS BEEN TOUCHED UP SO YOU CAN HARDLY TELL. THERE ARE A COUPLE OF VERY MINOR MARKS ON A COUPLE OF OTHER WHEELS. COME WITH 225/55/18 TYRES. - TWO TYRES HAVE AROUND 5-6 MM TREAD REMAINING - ACCELERA IOTA ST68. - ONE TYRE HAS AROUND 3 MM REMAINING BUT HAS SOME MINOR EDGE WEAR - TOYO PROXES. - ONE TYRES HAS AROUND 3-4 MM TREAD REMAINING - MICHELIN PRIMACY 4 ALL TYRES HOLDING AIR PERFECTLY. ALL WHEELS COME WITH ORIGINAL CENTRE CAPS. NO CRACKS, CANNOT SEE ANY FLATSPOTS OT BUCKLES. CANNOT SEE ANY PREVIOUS WELDS. BOUGHT THESE TO USE AS A WINTER SET ON MY A3 BUT THEY ARE THE WRONG TYRE SIZE. WOULD CONSIDER A PART EX WITH A SET OF 18" A3/S3/S-LINE WHEELS - LET ME KNOW WHAT YOU HAVE. LOCATION, BIRMINGHAM. £295 ono .

No i haven't, i did replaced belt tensioner too