Latest Posts

Me too, but all's well that ends well.

Stripping the calipers is a good idea, but I can't help with personal experience or diagrams.

Getting blood from a stone is easier.

Oh I see now. Nope it seems to operate as normal, starts easily every time.

Yeah will update you as I progress, I'm sure ti be popping up for a while I was always on Audifans back when mine was on the road and I've a fair bit of work to do thanks.

Welcome Leroy, but am I missing exactly what the problem is? Regards, Gareth.

MOT until 02/26. I bought it from Yeovil Audi in 2013 with only one previous owner. All Audi main dealer history to 2022 then Fergies in Thatcham in 2023 and a local garage last week. It has done 120k. I'm looking for £5,590. The car is located in Reading, Berkshire. Features: AC & Climate Automatic headlights & wipers CD/Radio/Bluetooth/SatNav Cruise Control Front Heated seats Electric Heated Mirrors Leather Seats Parking Sensors 4x Electric Windows Xenon Headlights Note: there is minor cosmetic damage to the rear bumper and near-side rear wing. I can supply photos if required. I have plenty more photos if you are interested.

Have you progressed this matter during the month Andy?

Any update for us Tom?

Are you going to return to the form Sam, to update on the questions posed?

Hello Ian, As far as I’m aware, there aren’t any ‘Workshop Manuals’ now being published- apart from what you might have found as downloads, or on subscription systems such as Autodata. Kind regards, Gareth.

Ayoop folks, we took her out for a run (breakdown services unknowingly on standby!) and put her through her paces on comfort setting, so roundabouts, fast exits from junctions etc and all seems good......I kinda wonder what's going to sulk next, but I'll cross that bridge when I get to it. In the meantime, the fuel gauge isn't working and I sometimes can get it to work by folding down the offside rear passenger seat, or placing something heavy on the seat cushion. I wonder if this means a wiring fault as opposed to a failed(ing) sender unit. As I rarely use the performance, 600 miles between refills is what I go with, but the range data would be nice to have again.....thanks again everyone.

Hi guys can anyone suggest a part no. checking site I'm trying to confirm parts for a front brake upgrade on my b3 16vq I've got the twin pot calipers but have been told I also need the hubs from a 90q so got hold of 2 part no DE 895258 & 7 k just want to make sure they're correct before they're refurbed thanks

Wowsers that's a big saving. Thanks for the write up Dave I'll pin your post so it'll be easier for other q7 owners to find

Think it takes a reading from the gearbox

Where have you tried so far? You could try eBay, or the old fashioned way and Google local breakers yards that might have a VAG group vehicle with the same engine.

It's only condensation and nothing to worry about. Water vapour is formed during combustion which then condenses in contact with cold steel. It will be worse in cold weather and will disappear when the exhaust system is hot.

SET OF 4, AUDI A6 S-LINE 18" INCH ALLOY WHEELS & GOOD TYRES. MANUFACTURE PART CODE: 4K0601025D CAME OFF A AN AUDI A6 C8, MAYBE THE ALLROAD QUATTRO ALSO. CODES OFF THE BACK OF THE WHEELS: - E 8Jx18H2. - ET39 - 4K0601025D - DOT - 008868/2013 - AlSi7M - AUSTRIA - AA3 - AU191 K4 WHEELS ARE IN PRETTY NICE CONDITION. ONE WHEEL HAS A MINOR GRAZE ON THE EDGE OF THE SPOKE AND EDGE OF RIM, WHICH HAS BEEN TOUCHED UP SO YOU CAN HARDLY TELL. THERE ARE A COUPLE OF VERY MINOR MARKS ON A COUPLE OF OTHER WHEELS. COME WITH 225/55/18 TYRES. - TWO TYRES HAVE AROUND 5-6 MM TREAD REMAINING - ACCELERA IOTA ST68. - ONE TYRE HAS AROUND 3 MM REMAINING BUT HAS SOME MINOR EDGE WEAR - TOYO PROXES. - ONE TYRES HAS AROUND 3-4 MM TREAD REMAINING - MICHELIN PRIMACY 4 ALL TYRES HOLDING AIR PERFECTLY. ALL WHEELS COME WITH ORIGINAL CENTRE CAPS. NO CRACKS, CANNOT SEE ANY FLATSPOTS OT BUCKLES. CANNOT SEE ANY PREVIOUS WELDS. BOUGHT THESE TO USE AS A WINTER SET ON MY A3 BUT THEY ARE THE WRONG TYRE SIZE. WOULD CONSIDER A PART EX WITH A SET OF 18" A3/S3/S-LINE WHEELS - LET ME KNOW WHAT YOU HAVE. LOCATION, BIRMINGHAM. £295 ono .

No i haven't, i did replaced belt tensioner too

Is this the vacuum operated locking system? I recall a similar forum question a year or two ago to which there was no resolution sadly.

Tony. If the water pump was not replaced at the same time as the belt as it should have been, that could be the source of the noise. As Steve said, get the car to a garage ASAP, because a belt failure is usually sudden and the consequent engine damage can be catastrophic. Opinions on belt duration, even from Audi, have changed over the years. I would stick with the older 70000 miles recommendation for peace of mind. It's an expensive job at £700 but a lot cheaper than a new engine.

Get yourself a cheap multimeter and test whether: [1] power is getting to the motor, [2] the resistor is working, [3] the switch is working, [4] the motor earth connection is not broken.

It's good to know even lurkers can benefit from the forum.

I think it was from a 2015 model. The Mileage would be unknown that’s the only thing. The bushes are showing signs of wear and I’m not sure how much play they should have. I’ll compare with mine when removed. Iv ordered bushes and I’ll experiment with my old subframe when removed. I think the threaded bar and cup would work well and I did find an Audi tool but it was near £1000. Plenty of cup and bar tools for other manufactures for £40-50 so I’ll take measurements and see if I can find one that works.