Leaderboard

From all the admin team Just want to wish all our members a happy Easter 🐰🐣 hope you have a great day 😊

Thanks for being in touch Linds. When you say your small garage tightened the belt, and it now makes a noise - concerns. I’m also intrigued to work out how you actually know the belt is tighter than it was. If (in caps) the belt is tighter than it should be, are you happy to entrust the fitting of a new belt and assembly to them? Water pump? - if cambelt driven on your engine. Wondered what you propose to do about that. Kind regards, Gareth.

Hi All just thought id share if it already hasn't been i lost power to my front doors no windows worked wing mirror stopped and central locking to drivers door, so after stripping own the dash under the wheel to get to the fuse box to check all wires and taking the door cards of and looking couldn't find any damaged wires it turns out that it was the ground wire to the module in the door that had dis connected somewhere in the rum so ive snipped it and joined a new wire to a bolt that has a ground in the door all working again now . just thought i would share in case someone else has this problem

Just to say that I bought a space saver 19" wheel from The Wheel Shop along. As Stevey noted above, I then stuck several sections of polystyrene using gaffer tape (pic 1) to support the wheel and keep it off the battery cables to the left and right. Enough space underneath the wheel to store the compressor and tyre repair bottle (pic 2) (just in case). This raised the spare wheel but there was still just enough thread available on the centre to allow me to use the normal large plastic nut to hold the spare in place (pic 3). Although the spare was a little higher than normal due to the polystyrene, there's still enough space to allow the top cover to sit flat in the boot. Lastly the tools including jack fit in the plastic tray (pic 4) between the battery and the back of the rear seats (blue towel round them to stop rattling).

Hi all, I came across an issue recently that appears common enough for people to post with requests for solutions but unusually where I failed to find a concrete fix. So here is my stab at this: The other week I went to do an oil check, pulled the bonnet release level and to my dismay felt no resistance and the bonnet remained firmly shut. Bugger – how to get the bonnet open? There is no access from the front – even destroying off the plastic grill will not get you to any bolts that will help. What is the solution without resorting to a can opener and consequentially a new bonnet?? Here it is… It will be much better to download the attached pdf as this has pics that will help a lot, but instructions with no pics are: 1. Go to B&Q (or equivalent hardware store) and purchase a 4-6mm diameter steel rod between 70 cm and a meter in length. Mine cost £2.60!!! 2. Get a decent vice and make two 90-degree bends at each end of the rod about 10 cm from end of rod by hand (I off-set each end by 90 degrees approx.), to make a ‘emergency bonnet release tool’. 3. Get the front of the car on ramps or jack up as high as possible. Remove undertray and get a good torch and get underneath…. 4. You need to locate the bonnet lock mechanism – it’s at the top of the radiator fans. It will be very hard to see… From below, at the right angle, you should be able to see the underside of the lock mechanism look for the large spring. 5. The reason you are unable to open the bonnet might be: 1, the cable has snapped; or 2, (as in my case) the end of the cable has come lose from the lock mechanism. The 2nd issue is common if you have had the front off and lock carrier into the service position and the cable-end has not been seated back in properly… 5. There are actually 2 sites for a cable to connect. If you have a RHD vehicle then the cable seats into the lower slot; if a LHD then upper slot. You need to get the end of your ‘emergency bonnet release tool’ into one of these two slots, and then twist using the lock housing to lever off and move the release mechanism. If you get into the lower slot the twist right; if you get into the top slot, then twist left. If you use a tube spanner or the end of a ring spanner to get on the other end of the rod where the other 90-degree bend is then you get more force and the bonnet should open! Brilliant. 6. I then decided to add a bit of thick plastic cut to size to cover the cable end housing to stop it coming out again. Drill a small hole and tap a screw into it but do not tighten yet. 7. Reinstall the lock, and reseat the cable end properly, then swing the plastic down over the cable end and tighten screw. Not sure if this will work/last, but at least you now have an ‘emergency bonnet release tool’ to sort it… Hope this is of some help…. Bonnet open solution.pdf

Oh Father in Law!

Hi, as long as the cables for the extra battery don't go inside the wheel tub you should be fine measure the O/D of your existing wheels on your car and marry that against the I/D of the wheel tub, the moulding for the cr@p inflation system is removable and just leaves you the threaded spigot which will anchor your space saver, you can get round the possible noise of the wheel against the floor by buying some cheap stick on insulation, about 4mm thick from eBay and sticking it around the tub, if you mount the wheel face down you can use the space inside the wheel for your jack wrapped in an old towel or similar, just did this on my new Passat cab and found to my joy that the wheel tub was deep enough to take a full size spare. Steve.

Hi Gareth I appreciate your sentiment but realistically I doubt it will make a difference to more than a minority as most of these one post wonders can't even be bothered to look through the legions of post on this wonderful site to see if there is already an answer to their question, NO its far easier just to wait for some poor soul to to spoon feed the answer to them, I find this situation intolerable and on a personal level endorses my opinion that charging a small joining fee would eradicate the free loaders and any funds gathered from serious users would help with the costs of this forum, I have joined a few forums in my time and all required a subscription with the exception of some Ford forums, over the last couple of years the formulae for this situation has become blindingly apparent these people buy these cars in the blind belief that the Audi never goes wrong, someone told them that and its what they wanted to hear, most of the members on here all know that statement to be far from the truth, thats why they are here and after their own problems are solved actively engage in trying to help others, I have noticed lately that a couple of new members have posted the problem and the solution to that problem that they have worked out for themselves, we could definitely do with more members with that mind set. Steve.

Post and run! Joined April 3rd - posted plea for help on April 3rd - not returned since to review any responses. Time taken to construct replies is free of charge, but it is time consuming! Best we can hope for is the information maybe of help to others.

Unless the power steering emis whining etc id say it's normal compared to new cars.

Kat. Who or what is telling you that the ABS module is faulty? The dashboard lamp, a proper VAGCOM diagnosis, a cheap code reader, a mechanic, or something else?

Is it worth considering the abs sensors? As they're cheaper to replace before changing the module

https://www.google.com/search?q=audi+a6+gearbox+code+QLX.&oq=audi+a6+++gearbox+code+QLX.&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIGCAEQRRg80gEJMTA3MGowajE1qAIAsAIA&sourceid=chrome&ie=UTF-8

happy easter to all the admin thank you for all your time and effort best wishes stephen😁

Hi Sean, I ended up finding the LUK 0B2105266T flywheel on ebay for £300 brand new. The garage removed the old clutch and said it was a Sachs after all… but they put the LUK flywheel in with LUK clutch plate kit clutch has been in nearly 12 months or so and all is well! Had timing belt and water pump done at the same time. I did have a bit of trouble after as the garage said they nudged an EGT sensor when removing the clutch assembly. Car ended up going into limp mode with the coil light and DPF warning coming on. New sensor sorted that.

Hello Mick, Thanks for joining, but without being dismissive, you really should entrust this issue to your supplying dealer. You will have/will be paying a lot of funds for this new vehicle, and you really should not be expected to trouble-shoot issues with it. Have you contacted them? Kind regards, Gareth.

Pic 1 for sure

Hi Natasha and welcome, this forum has a lot of info on Q7 ownership and its pitfalls as well as solutions to those pitfalls. Steve.

Well i finally got my coolant leak issue resolved. Hose and seal issues. So extended warranty wouldn't cover it. Dealer said they will cover costs as gesture of good faith. ( i did wait a while for an appointment) I am pleasantly surprised, and faith in the dealers has been considerably restored. Any other pleasant dealership stories out there.

Audi have replaced the drivers door latch under warranty part no. A4K2 837 016 H the car still at Audi checking hand brake .

Hi thats not the service position thats the motor knackered, they don't have a service position, this is a well known problem as its a bad design a percentage of water gets past the spindle seal and terminates the motor. Steve.

Hi guys, first time here, just seeing if anyone was interested in my FiL’s A4. He’s lovingly looked after it from new, first registered in September 2000, stacks of paperwork and only 94,000 miles. He’s only selling as has finally taken the plunge and bought a new Q2 (at age 83!) so this is no boy racer car. Rare-ish 2.4 petrol, runs well, tax to September, MOT until July. Bad points - slight scuff to front wing, little bit of bubbling on roof, but nothing you’d not expect for a 24-year-old car. Garaged every day, and Audi of course offered peanuts for it. Tbh he’d rather see it go to a good home. Currently located in Redcar. Please inbox with any questions, I’ve tried to be honest but I’m not a specialist so please let me know if I can help. Cheers.

Welcome Fi, and thanks for joining. First things first:- Can we take it you have studied copy of the on-line MOT history for this car? Also, have you seen evidence of its service history? Have you done an on-line DVLA Vehicle Check to see when the last V5 was issued? This will give you some idea of how long the last owner has owned it? Short ownership - possibly not good. Down to specifics:- Water leaks- search the forum for issues and possible solutions. Panoramic roof - potentially a problem area due to generally non solvable leaks. Personal view ( pardon the pun!) I wouldn’t be interested. Hopefully owner members will fill in the remaining answers for you. Hope some of this helps, Kind regards, Gareth.

Hi everyone I'm new here and already had some great help from members, read loads of useful stuff, I've personally imported a 8p s3 in yellow for my wife from Japan it's not our first import I buy all our cars from Japan. I will try to add a couple of photos soon

Hello Charlie, Yes, the new battery has to be coded to the car. Kind regards, Gareth.

Hi its pretty tight in there I would definitely check the depth of the recess more than any thing to make sure the tyre width wont exceed the height of the floor cover a good quality rubber boot liner would take care of any chafing issues, my A6 was never even close to the amount of boxes and wires you have. Steve.

Hi it took so long because the software to run electric power steering was not that well developed, if mechanical steering fails you can still steer, on the early electrical steering if it fails you are stuck, the main reason for the development of electric steering was emissions as it wont require the engine to drive the pump thus pushing up engine emissions and electric steering has been about on production cars since about 2008. Steve.

For sale: 2003 Audi A3 Quattro Sport 1.9 TDI (130 BHP) 3 door hatchback The car has fairly low mileage for its age (not quite146,000 miles). Careful lady owner from 2007 to present (1 prior owner) Purchased in 2007 the car is still running well and has been serviced at makers specified intervals. (Full service history available). MOT covers up to 11 November 2024. Latest regular cambelt & water pump replacement was January 2021 (@135,800 miles). Reconditioned gearbox & new clutch in January 2022 (@139,900 miles). All road springs have been renewed. Suspension bushes renewed. New headlamp housings were fitted in 2017. New battery was fitted in February 2023 (5 year guarantee). New front tyres in November 2023. (Rear tyres have over 60% tread remaining). Minor mechanical repairs were addressed as required during ownership, & details can be provided. There are a few very minor bodywork ‘dings’. Alarm removed for repair (available). Fuel & temp gauges under reading. Love this car but reluctantly selling as we don’t have space for it any more. Looking for best offer of £1,000 plus for this rare A3 variant.

Good Morning I have a partition net/dog guard ( part number 4G9 861 691 94 H) suitable for A6 Avant. Free of Charge if anybody would like it. Also I have an Autochair mobility scooter hoist for the A6 Avant. Cost £1400 also free of charge, this comes with modified rear boot screen and side panel, to anybody who needs it. Tony

Hi everyone, I'm not an Audi owner yet, but that's about to change as I just pulled the trigger on a 2023 A5 Sportback. After 8 years of driving SUVs, I'm looking forward to something that goes round corners properly!

I have a fix. I also own a mk2 Golf and I spotted a detail on the gas peddle cable that is the same for adjustment, at the end there is a castellated section with a clip on it for tension, I added a couple of castellations to the tension and I now have 1k solid tickover. 😁 The clip sinks into the rubber grommet, lowering the tension over time. 😎

Yes agree re navigation software. I do know the Audi garage did update the software including MMI software but whether that is latest (unlikely) is anybody's guess and was just pleased I could use android auto wirelessly (plus fixing maps / navigation issues). The only OTA updates I have seen are for the navigation maps and each of those has been successful. If you are picking up from a dealer I would ask them to sort it out for you - I know mine have been great when I have asked them.

Hi have you tried eBay with that part number they have loads of them.

Update, still in garage but mechanic had a week off, taken apart and parts awaiting testing, pump and injectors. they did say they had some “sludge” in the turbo hoses ? Not had any experience with these cars before so I’m bald and chewed through all my nails.

The low oil consumption suggests the engine is in reasonable condition for its age, and in standard form would likely not have high CO emissions. Therefore I'd say your modifications are responsible for the problem, and the solution is to restore the engine to standard form.

Hi the best thing to do is ring an on line company Parts in motion they will be able to tell you exactly what size discs you have from your REG/VIN Number, they only sell on eBay but will be able to give you item number for discs that will fit your car, and are probably 40% cheaper than Euro car parts, I use them a lot and I have never had a bad experience. Steve.

It could be a back tyre issue, or any of a dozen different issues from the sparse information you have provided. Whatever the cause, if you bought the car recently take it back to the dealer you bought it from.

Diane. Have you read the whole thread? There are suggestions near its start, and questions which would help all of us to home in on your problem.

£7680 private, £8130 independent dealer, £8990 franchised dealer. That's true, he could've said! I did ask him to send me MoT & service history, but that won't be until Tuesday as he's away working, which is before we had arranged to view, if we do. Still mulling it over atm. I will let you know what we decide. Kind regards, Dawn

Hi Gareth, try TOYO PROXES my mate has just fitted those to his wife's golf and reckons its like driving on air compared to the Continentals he previously had and also reports back the wet grip is phenomenal. Steve.

No vat they are a very good garage use them alot " viking motors " in rotherham they have 5 star on google thanks gareth

Update - solved the issue. Upon reading other threads I checked the ABS wheels speed sensors on all 4 corners. The front passengers side sensor was damaged. A break in the sensor case was letting water into it. I’ve replaced the sensor and the faults have all gone away. It was a bit of a pig to change as it’d melted into the bearing housing. Quite a coincidence that the wheel bearing was changed by the garage a few weeks before all these faults started appearing.

Thanks yes, saw that thread. It seems a common issue with the C7, they like to let water in as much as possible. Further investigation this evening and I narrowed down the leak. See the picture attached, but the leak is coming through a seam in the side wall. Circled the area in red. I have sealed this area with Gorilla waterproof patch & seal tape. I removed the Voltage stabiliser unit to dry it out, and also moved the wiring loom for the Voltage Stabiliser unit up and back out of the spare wheel well up into the area where the main fuse board unit is. I hope that these two actions will cure the problem.

OK - mystery solved !!! Initial diagnostics pointed to a faulty stop/start generator (AKA Alternator). A replacement was ordered and required shipping from Germany as none in the UK. The part was delivered and then an instruction received by my Audi garage NOT TO FIT THE PART and run another check - per Audi instructions. This new check indeed revealed the root cause of the problem that I have been experiencing. The problem was due to a defective Auxiliary Belt Tensioner. Required parts were fitted and included a replacement belt - this was more a precaution than requirement as the defective belt tensioner may have contributed to premature excessive wear. I insisted that the car was taken for an extensive test drive before taking it back. All was well - and still is. I now have the car back (after 2-3 weeks off the road while awaiting parts). Will monitor the situation, but reasonably confident that this time Audi have got it right.

Could be the ECU and the only way you'll know is sending it off for repair. You might be able to buy a second hand one from eBay but it must be the exact same part number. Then the imobiliser will need to be removed from it or recoded to work for your car.

Hi, I have tried many different ideas to stop water getting into the boot cavity. So, I recently covered all the joints between the boot liner and the boot with duct tape and left it for several weeks. Great, no water in the cavity. During the recent weeks I have started removing sections of the tape to see when the leak started again. This process took a while to do. I have now only tape on the side of the boot and around the rear of the light cluster, see photos. We’ve had no rain of late so will remove one of these and see what happens when it rains again. So far, no water in the cavity. Anybody who tries this, and it works, or doesn’t please let me know. Regards Ian IMG_0830.HEIC IMG_0958.HEIC

Anybody know where I can get my gearbox mechatronics unit checked as I have lost my reverse gear and have a warning sign audi talking thousands of van need a quick fix west Midlands area anybody body know a good mechanic for the job

Thank you so much. Will look into them. Sorry to hear you've been ill. Hope you're recovering now? I'd suspended work on the A6 in the short term whilst I've been doing the house up and getting prepped for our new (first) arrival.